Engine prices
Black Devil complete engine retail price plus shipping
from Chicago (hand start model) .............................$2,575.00
Black Devil complete engine retail price ............... $2,775.00
plus shipping from Chicago (electric start model)
Black Devil hybrid engine (hand start and electric start) $2,975.00
Black Magic (Cors-Air M19) with clutch: retail price $2,475.00
Note:
Dealer's price will be applied only if five or more engines
are purchased at the same time.
Parts
Air-box with rubber flange (silver box)......................$79.55
Air Box rubber flange ................................................ ..$21.55
Air Box foam insert ................................................ ......$56.00
Belts (Poly "V" 483 or 508) (part# 21) 15 groove.. ....$38.50
Belts (Poly "V" 483 or 508) (part # 21 b) 12 groove ...$36.50
Back Support base incl. Oil Seal (part# 33) .............$194.00
Cylinder head (part # 2) ..............................................$176.75
Cylinder head w/ decompressor hole (part 2 bis).....$186.20
Cylinder (part #3 (incl. base gasket and exhaust manifold
studs, specal nuts and washer) .............. ..................$446.00
Cylinder base gasket (part# 6) .......................................$6.75
Cylinder head gasket "O"ring (part # 5) .......................$12.58
Cylinder exhaust gasket................................................$11,00
Carburetor gasket (part # 16) .........................................$4.55
Crankcase complete (part # 7 & 8).............................$450,00
Crankshaft complete w/connecting rod (prt # 9)......$399.00
Crankshaft oil seals -pair (part # 11) ............................$36.52
Crankshaft bearings pair (part # 10) KOYO / Japan....$80.00
Carburetor flange (bed) (part # 18) ...............................$35.70
Decompressor complete w/ hose and check valve.....$69.00
Decompressor alone.......................................................$60.00
Manual decompressor....................................................$59.00
Electric starter (part # 27) ..........................................$189.00
Electric starter plate with oil seal (part 33).................$77.00
Electric starter solenoid (high Amp version).............$30.00
Hand start oil seal plus plate.........................................$55.50
Engine mounts 1 Piece (factory approved).................$20.00
Exhaust gasket(old type)..............................................$10.00
Exhaust gasket new type (metal reinforced).............$12.00
Exhaust complete (exhaust manifold, tuned pipe,
muffler, brackets, bolts, springs) ...............................$499.00
Silencer Only (muffler).................................................$182.75
Tuned pipe alone (new and improved )......................$392.00
Silicone sleeve for tuned pipe/ muffler connection..$10.00
Exhaust manifold (only) (new and reinforced)...........$75.50
Exhaust manifold gasket..............................................$10,00
Exhaust spring (old type)................................................$3.00
Exhaust spring new type (with swivel)..........................$6.00
Exhaust manifold stud and special nut........................$6.75
Hand wheel (magnetic wheel) (part # 32) ..................$95.70
Hand start complete mechanism (3 dogs).................$85,60
Hand start basket (coupler) part 19...........................$22.50
Ignition module made by IDM (part # 31) ..................$139.40
Ignition coil ( part # 28) hand start model...................$66.50
Ignition coil (part 28 b) electric start model...............$75.00
Ignition magnetic wheel ( electric start)....................$72.70
Needle bearing for piston .............................................$35.75
Piston complete with rings, wrist pin +
needle bearing and clips (part # 12; 13; 13b) ...........$192.75
Piston rings (chrome plated) one pair .........................$58.60
Propeller crush plate (impproved)................................$20.00
Reduction pulley eccentric shaft with safety clip .....$39.00
Reduction (big pulley) w/bearings, new version
with 15 grooves (part # 20 bis)..........................$275.00
Reduction small pulley with crown or cooling disc
part #23 and 24 new version with 15 grooves..........$175.00
Reduction bearings (pair) 6004 C3 (part 26).KOYO....$ 76.00
Reduction bearings (pair) 6003 C3
Reduction pulley eccentric shaft (no bearings)..........$36.50
Reed valve complete (part # 17) ...................................$76.50
Reed valve petals set of two (part # 17b) ....................$50.80
Voltage regulator made by IDM (part # 29) ..................$45.30
For any technical support, please call us at 708-341-5900.
Unlike other dealers, we answer your calls 12 hours a day, 7 days a week.
We are trying hard to offer the very best possible technical support.
Please, visit The Inventions Page where you will find many answers to technical issues, improvements and innovations and articles published by PPG pilots from all around the World
|