Engine prices for 2011
Notes:
-dealer's prices may be applied only if one or more engines are purchased in the same time
- with NO exceptions, the military version of these engines ( for Unmanned Aircraft )can be
purchased only by military contractors!!
Engine parts and prices
Air-box with foam filter and rubber flange (new)
....$99.55
Air-box foam insert
.
.$60.50
Air Box rubber flange .....................................................$22.55
Belts (Poly V 483 or 508) (part# 21) 12 groove........$37.50
Belts (poly "V" 483 or 508) 15 groove ..........................$39.50
Back Support base incl. Oil Seal (part# 33) ...
........$199.00
Cooling shroud & hardware for Black Devil ...............$93.00
Cooling shroud & hardware for Black Magic ..............$89.00
Cylinder head (part # 2) (no decompressor hole)......$186.75
Cylinder head with decompressor hole
.
.
$199.20
Cylinder alone (part #3)..............................................$475.00
Cylinder base gasket (part# 6) .........................
............$7.75
Cylinder head gasket O ring (part # 5) .........
...........$13.58
Cylinder exhaust gasket new and metal re-enforced..$12.50
Carburetor gasket (part # 16) ...........................
............$5.05
Crankcase tie rods (set of 4) ..........................................$29.00
Crankcase (part # 7 and #8)...............................
........$455,00
Crankshaft complete (part # 9)....................................$435.00
Crankshaft oil seals -pair (part # 11) .............................$39.52
Crankshaft bearings pair (part # 10) (KOYO).................$82.00
Carburetor flange (bed) (part # 18) .......................
......$39.70
Decompressor (automatic).............................................$64.00
Decompressor ( automatic) with hose
and check valve
.............................................
..$76.00
Decompressor (manual) .................................................$63.00
Engine rubber mount (factory approved) 1 pcs............$20.00
Electric starter alone (part # 27).........................
......$255.00
Electric starter hardware (bracket, clamp etc) ...........$25.00
Electric starter plate with oil seal (part #33)................$85.00
Electric starter magnetic wheel with Woodruff key....$87.50
Electric starter solenoid (70A) ......................................$63.00
Electric starter "BENDIX" (clutch and gear).................$82.00
Electric starter upgrade with: starter, safety brackets ,
clamp, rubber insert, scre4s, nuts and
electric starter plate small reduction pulley with crown
and starter solenoid (70 Amps)..................................$550.00
Exhaust parts:
Exhaust manifold gasket metal re-enforced ...............$12.75
Exhaust complete (improved stainless steel constr.)
(includes: manifold, tuned pipe, muffler springs, gaskets
and all hardware incl. two rubber mounts)................$595.00
Exhaust muffler (new type)...........................................$198.50
Tuned pipe alone new type, stainless steel with improved
and stronger spring brackets.....................................$475.00
Exhaust manifold (only).....................................................$88.50
Exhaust special silicone sleeve ......................................$11.00
Exhaust spring old type...................................................... $6.00
Exhaust spring new type (longer)...................................... $9.00
Exhaust spring old type with swivel
...
..
$7.00
Exhaust manifold stud
......................................................$6.75
Exhaust manifold special nut..............................................$2.00
Exhaust spring new type with swivel
...
.....$9.00
Exhaust (muffler) rubber mount (improved).....................$15.00
Hand wheel (magnetic wheel) with Woodruff key
(part # 32) ......
................................................................$95.70
Hand start mechanism complete with 3 dogs
....
.....$99.00
Hand start basket (coupler)
.
......$22.50
Hand start spring alone .......................................................$27.50
Hand start retaining plate for 3 dogs..................................$11.25
Hand start engine round oil seal plate with oil seal..........$55.50
Ignition parts:
Ignition module made by IDM (part # 31) ...........
........$152.40
Ignition coil ( part # 27) for hand start model..................$75.55
Ignition coil for electric start model (part #28b).............$88.75
Needle bearing for piston wristpin (silver plated)
....
$43.75
Pistons:
Piston alone (type O,A,B or C) w/ wristpin and clips......$170.00
Piston complete with rings, wrist pin +
needle bearing and clips (part # 12; 13; 13b) ..............$220.75
Piston rings chrome plated and beveled (pair)
.
.
.....$67.60
Propeller crush plate (improved)........................................$15.00
Reduction parts:
Reduction pulley eccentric shaft w/clips & spacer
.....$45.50
Reduction pulley bearings (KOYO) pair.............................$75.00
Big reduction pulley complete 15 grooves(improved)...$290.00
Big reduction pulley complete 12 groove......................$270.00
Small reduction pulley15 grooves with disc for any reduction
except the FORTE configuration(1:2.88)...................$189.00
Small reduction pulley 12 groove with disc
1:,2; 1:2,5 and 1:2,6 reduction ........................................$160.00
Small reduction pulley with crown gear 15 groove
(any reduction except FORTE (1:2.88)...........................$229.00
Small reduction pulley with 12 grooves and crown gear
Small reduction pulley with 15 grooves FORTE config.
(1:2.88 reduction) with cooling disc..................................$195.00
Small reduction pulley 15 groove with crown gear
for the FORTE configuration (1:2.88 reduction)..............$199.00
Reed valve assembly complete (improved) (part 17)........$82.50
Reed valve petals (only) (set of two) part 17b....................$60.00
Voltage regulator for the electric start model by IDM ......$49.30
For Black Devil or Black Magic Owner's Manuals (short or expanded version)
